No products
Prices are tax included
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
Price drop
-
2,63 € 4,13 €U profile 4mm, 2100mm
U profile for polycarbonate U 4 mm 2.1 m The U-shaped profile is intended for covering the ends of the panels, protects the plastic honeycomb from dirt and dust, as well as the drainage of condensate from the plastic cavity.This profile is used when installing 4 mm thick sheets. The length of one profile is 2.1 meters
2,63 € 4,13 €Reduced price! -
2,85 € 3,56 € -20%Sale!Base support for corrugated sheet wave 76/18
Base support for corrugated sheet wave 76/18 When installing PC plates, it is recommended to use support brackets. The supports should be installed on each batten throughout the entire roof area, with fastening every second wave. The consumption is approximately 20 fastenings per square meter.
2,85 € 3,56 € -20% -
2,85 € 3,56 € -20%Sale!Basic support for trapezoidal sheet 70/18
Basic support for trapezoidal sheet When installing PC plates, it is recommended to use support brackets. The supports should be installed on each batten throughout the entire roof area, with fastening every second wave. The consumption is approximately 20 fastenings per square meter.
2,85 € 3,56 € -20% -
3,67 € 5,17 €U profile 6mm, 2100mm
U profile for polycarbonate U 6 mm 2.1 m The U-shaped profile is intended for covering the ends of the panels, protects the plastic honeycomb from dirt and dust, as well as the drainage of condensate from the plastic cavity.This profile is used when installing 6 mm thick sheets. The length of one profile is 2.1 meters
3,67 € 5,17 €Reduced price! -
4,08 € 5,12 €Kekkilä garden soil 60 L
Garden soil is high-quality black soil for planting all garden plants and building lawns. The garden soil is suitable for the construction of permanent and flower beds as well as for land improvement works in the garden and bed. High-quality black garden soil for planting all garden plants Fine sand and clay have been added to ensure airiness...
4,08 € 5,12 €Reduced price! -
8,13 € 10,16 € -20%Sale!Stainless steel screws with washers
Stainless steel screws with washers for fastening polycarbonate sheets and corrugated PC panels. (Screws 4.5x45 mm, washer d=20 mm)
8,13 € 10,16 € -20% -
10,16 € 12,70 € -20%Sale!Galvanized washer D30mm
Galvanized washer D30mm - pack of 50 pcswell suited for fastening various polycarbonate sheets
10,16 € 12,70 € -20% -
13,72 € 15,25 € -10%Sale!Galvanized washer with gasket D25mm
Galvanized washer with gasket D25mm - pack of 50 pcswell suited for fastening various polycarbonate sheets
13,72 € 15,25 € -10% -
14,27 € 17,27 €Kekkilä growth peat 300 L
Growth peat is a dark peat fertilized and limed with a basic fertilizer, which is suitable as a growing substrate and to improve soil properties for all plants in the home garden. It is also a great growing medium for plants in home greenhouses. As a growing medium for the greenhouse For land improvement on clayey and sandy soils Fertilized and...
14,27 € 17,27 €Reduced price! -
15,25 € 20,33 € -25%Sale!Roof wall transition profile for...
Roof wall transition profile for corrugated sheet 76/18 PVC CLEAR Available sheet sizes: Trapezoid profile - 76/18 L-730 mm (transparent color) Wave profile - 76/18 L-715 mm (transparent color)
15,25 € 20,33 € -25% -
15,67 € 20,67 €H profile 6mm, 6000mm
Profile for polycarbonate connecting H thickness 4mm, length 6000mm H-profile is intended for connecting two sheets of polycarbonate.
15,67 € 20,67 €Reduced price! -
15,67 € 20,67 €H profile 4mm, 6000mm
Profile for polycarbonate connecting H thickness 4mm, length 6000mm H-profile is intended for connecting two sheets of polycarbonate.
15,67 € 20,67 €Reduced price! -
24,39 € 32,52 € -25%Sale!Ridge profile, wave/trapezoidal profile...
Ridge profile, wavy/trapezoidal profile 76/18, PC Transparent Available sheet sizes: Trapezoid profile 150x150x1270 mm (transparent color) Wave profile 150x150x1270 mm (transparent color)
24,39 € 32,52 € -25% -
25,01 € 29,42 € -15%Sale!"Greenhouse Peas" with a cover material
Greenhouse "Peas", sizes: Width - 1.1 metersHeight - 0.9 metersLength - 4; 6 or 8 meters
25,01 € 29,42 € -15% -
27,44 € 36,58 € -25%Sale!Polycarbonate impact-resistant corrugated...
Polycarbonate impact-resistant corrugated sheets. Used in the construction of gazebos and canopies. The material requires a substrate.Material thickness 0.8 mm, lathing is carried out with a pitch of 600 mm.The material is resistant to shock and destruction. Available sheet sizes: 0.8x1040x2000 mm, profile 76/18mm.0.8x1040x3000 mm, profile...
27,44 € 36,58 € -25% -
28,96 € 38,61 € -25%Sale!Polycarbonate impact-resistant corrugated...
Polycarbonate impact-resistant corrugated sheets. Used in the construction of gazebos and canopies. The material requires a substrate.The material thickness is 0.8 mm, the rafters with a pitch of 600 mm. The material is resistant to shock and destruction. Аvailable sheet sizes: 0.8x1040x2000 mm, profile 76/18mm.0.8x1040x3000 mm, profile...
28,96 € 38,61 € -25% -
28,96 € 38,61 € -25%Sale!Polycarbonate impact-resistant corrugated...
Polycarbonate impact-resistant corrugated sheets. Used in the construction of gazebos and canopies. The material requires a substrate.Material thickness 0.8 mm, lathing is carried out with a pitch of 600 mm. The material is resistant to shock and destruction. Available sheet sizes: 0.8x1040x2000 mm, profile 76/18mm.0.8x1040x3000 mm, profile...
28,96 € 38,61 € -25% -
28,96 € 38,61 € -25%Sale!Polycarbonate impact-resistant corrugated...
Polycarbonate impact-resistant corrugated sheets. Used in the construction of gazebos and canopies. The material requires a substrate.The material thickness is 0.8 mm, the rafters with a pitch of 600 mm. The material is resistant to shock and destruction. Available sheet sizes: 0.8x1040x2000 mm, profile 76/18mm.0.8x1040x3000 mm, profile...
28,96 € 38,61 € -25% -
42,69 € 56,92 € -25%Sale!Polycarbonate impact-resistant corrugated...
Polycarbonate impact-resistant corrugated sheets (trapezoidal, transparent color, matte surface) Available sheet sizes: Trapezoidal 76/18 1060x6000mm, matte surface Trapezoidal 76/18 1060x3000mm, matte surface
42,69 € 56,92 € -25% -
44,98 € 59,97 € -25%Sale!Polycarbonate impact-resistant corrugated...
Polycarbonate impact-resistant corrugated sheets (trapezoidal, bronze color, matte surface) Available sheet sizes: Trapezoidal 76/18 1060x6000mm, matte surface Trapezoidal 76/18 1060x3000mm, matte surface
44,98 € 59,97 € -25% -
45,73 € 60,97 € -25%Watering system "Vodomerka EKO"
Watering system "Vodomerka EKO" Drip irrigation system for connection with water container. Grow it wisely – an easy and convenient way to of looking after plants.
45,73 € 60,97 € -25%Reduced price! -
49,60 € 66,13 € -25%Galvanized raised bed "Premium"
Galvanized border (bed) 1m(0.7 m) Bed sizes:Width - 0.7 m - 1mHeight - 0.17 mLength - 2m,4m,6m,8m...
49,60 € 66,13 € -25%Reduced price! -
75,47 € 100,63 € -25%Sale!Corrugated PC 2.6mm 76/18 Prisma GRAY
Polycarbonate impact-resistant corrugated sheets. Used in the construction of gazebos and canopies. The material requires a substrate.The material thickness is 2.6 mm, the rafters with a pitch of 1100 mm. The material is resistant to shock and destruction. Available sheet sizes: wave 76/18 2.6x1045x3000 mmwave 76/18 2.6x1045x6000 mm
75,47 € 100,63 € -25% -
75,47 € 100,62 € -25%Sale!Corrugated PC 2.6mm 76/18 Prisma BRONZE
Polycarbonate impact-resistant corrugated sheets. Used in the construction of gazebos and canopies. The material requires a substrate.The material thickness is 2.6 mm, the rafters with a pitch of 1100 mm. The material is resistant to shock and destruction. Available sheet sizes: wave 76/18 2.6x1045x3000 mmwave 76/18 2.6x1045x6000 mm
75,47 € 100,62 € -25% -
75,47 € 100,62 € -25%Sale!Corrugated PC 2.6mm 76/18 Prisma CLEAR
Polycarbonate impact-resistant corrugated sheets. Used in the construction of gazebos and canopies. The material requires a substrate.The material thickness is 2.6 mm, the rafters with a pitch of 1100 mm. The material is resistant to shock and destruction. Available sheet sizes: wave 76/18 2.6x1045x3000 mmwave 76/18 2.6x1045x6000 mm
75,47 € 100,62 € -25% -
90,71 € 120,95 € -25%Sale!PC impact-resistant corrugated sheets 1.2...
Polycarbonate impact-resistant corrugated sheets. Used in the construction of gazebos and canopies. The material requires a substrate.The material thickness is 1.2 mm, the rafters with a pitch of 800 mm. The material is resistant to shock and destruction. Available choice: Sheet size - Trapezoid 76/18 1.2x1040x6000 mmChoice by color - transparent,...
90,71 € 120,95 € -25% -
111,44 € 151,44 €Drip irrigation system PRO with a timer
The Vordich PRO watering system with a timer will help solve the watering issue. It will water your plants in the greenhouse and on the plot at the right time without your participation. The Vordich PRO watering system with a timer is the presence of an automatic controller, with which you can select any interval and duration of water supply, meeting the...
111,44 € 151,44 €Reduced price! -
312,48 € 372,00 € -16%Sale!Greenhouse "Dachnaya-Dvushka"
Greenhouse "Dachnaya-Dvushka". Due to its small size (width - 2 meters), it is perfect for small areas. "Dachnaya-Dvushka" is a guarantee of a good harvest in a small garden, despite the weather!
312,48 € 372,00 € -16% -
412,51 € 515,63 € -20%Sale!Greenhouse "Dachnaya-ORBITA”
Economical polycarbonate greenhouse "Dachnaya-Orbita” is for growing vegetables and herbs in suburban areas.
412,51 € 515,63 € -20% -
455,34 € 650,49 € -30%Sale!Greenhouse "Mini"
Greenhouse "Mini" is made in the form of a house from a galvanized pipe 20x20, which does not rot and does not corrode. Covering for the greenhouse - cellular polycarbonate. It fits snugly to the frame, creating an ideal microclimate for plants in the greenhouse.
455,34 € 650,49 € -30% -
461,12 € 614,83 € -25%Sale!Greenhouse "ALFA 20"
Greenhouse "ALFA 20" The frame of the greenhouse "ALFA 20" is made of strong galvanized pipe 20x20. The main features of this frame: - high strength of structural elements. - ease of assembly and installation of greenhouses. - the best greenhouse model if you need foundation installation.
461,12 € 614,83 € -25% -
463,76 € 579,70 € -20%Sale!Greenhouse "Yota"
The greenhouse "Yota" has been designed and manufactured at the request of many gardeners who own small garden plots. Greenhouse "Yota" is guaranteed to produce good yields on a small area, regardless of the weather!
463,76 € 579,70 € -20% -
476,61 € 618,97 € -23%Sale!Greenhouse "Tryoshka Premium"
Company "Volya" presents the brand new greenhouse "Tryoshka Premium". For the first time wide strengthened profile was used in the particularly loaded frame parts, it can withstand high snow loads.
476,61 € 618,97 € -23% -
476,74 € 619,14 € -23%Sale!Greenhouse DACHNAYA STRELKA LUX 2.6
DACHNAYA STRELKA LUX 2.6 greenhouse is designed for creation of microclimate favorable for growing garden crops on cottage and household plots.
476,74 € 619,14 € -23% -
489,12 € 619,14 € -21%Sale!Greenhouse DACHNAYA STRELKA LUX 3.0
20:01:54 DACHNAYA STRELKA LUX 3.0 greenhouse is designed for creation of microclimate favorable for growing garden crops on cottage and household plots.
489,12 € 619,14 € -21% -
534,75 € 713,00 € -25%Sale!Greenhouse «SIGMA Premium»
New greenhouse - greenhouse "Sigma Premium". Greenhouse "Sigma" is the best greenhouse in its price range. Greenhouse Sigma is a universal option among a new generation of greenhouses made of galvanized square tube 40x20mm. Basic configuration of frame greenhouse has a 1 meter step between its arcs, snow load of 160 kg/m2 Quick and easy assembly.
534,75 € 713,00 € -25%